Electrical Vacuum Evaporator-Crystallizer by Heat Pump

The DESALT LT DRY series vacuum evaporator-crystallizer is designed to produce solid or semi-solid concentrates, as well as to recover valuable raw materials, such as metals and salts. The equipment operates with electrical energy and its heating and condensation system is based on a heat pump (HP) unit.

This evaporator can be manufactured with a screw conveyor inside the evaporation vessel to homogenize the product during the concentration phase, which facilitates the automatic discharge of the final product.

The operation of the equipment is semi-automatic or automatic (depending on the model) - 24 hours a day.

Our evaporators DESALT LT DRY

Main features

  • Technology: Heat Pump (Freon R-513A)
  • Single/Multi-Effect: Single-Effect
  • Vacuum: ≈ 60 mbar
  • Evaporation Temperature: ≈ 35 °C
  • Evaporation Vessel: Horizontal
  • Droplet Separator: Raschig rings
  • Heat Exchanger for Heating: External jacket
  • Refrigeration Circuit: Single heat pump unit or primary and secondary heat pump unit (depending on the model)
  • Vacuum System: Venturi Ejector
  • Control Unit*: PLC Siemens with HMI touch screen
  • Protection: IP54
  • Electricity Supply**: 400 V III + PE 50 Hz
  • Standard Manufacturing Material: 1.4401/1.4404 (AISI 316/AISI 316L)
  • Special Anti-corrosion Manufacturing Material***: 1.4410 (Superduplex 2507)

* Different PLC manufacturer available on request
** Different voltage supply available on request
*** Consult other available material options

Diagram

Vacuum evaporator - Crystallizer DESALT LT DRY

Technical specs

Parameter Unit 250 350 500 750 1000
Capacity* L/day 250 350 500 750 1000
Electricity Consumption** kWh/m³ 270 270 270 270 270
Length mm 1420 1640 2550 2900 3200
Width mm 1480 1520 1570 1600 1600
Height mm 2220 2220 2250 2300 2450

* Data refer to clean water when working continuously in standard conditions (T = 20 °C, P = 1013 mbar).
** Electricity consumption expressed in kWh per m³ of distillate produced.